-
About Kexun
-
-
-
Product Center
Contact Us
Contact person: Mr. Wang
dgkesion@163.com
zhouyi@kesionots.com(Sales Department)
No. 1, Building 1, Zhenrong Road, Wusha, Chang'an Town, Dongguan City, Guangdong Province
Battery cell/module high and low temperature test chamber
The high and low temperature and humidity test chamber (explosion-proof type) for battery cells/modules is used for simulating high temperature, low temperature, high and low temperature alternating, and constant humidity and heat environments for reliability testing of battery cells, modules, energy storage products, and other new energy industry products.
Category:
High and low temperature test chamber
Keyword:
Kexun
Mobile:18688631772 18925806499
Product Introduction
Product Introduction: The high and low temperature and humidity test chamber (explosion-proof type) for battery cells/modules is used for simulating high temperature, low temperature, high and low temperature alternating, and constant humidity and heat environments for reliability testing of battery cells, modules, energy storage products, and other new energy industry products.
Product Alias: Explosion-proof high and low temperature and humidity test chamber for battery cells, constant temperature and humidity test chamber for battery cells, temperature and humidity test chamber for battery cells, environmental test chamber for modules
► Integrated design, equipped with main/passive explosion-proof devices according to different severity levels, safe and reliable testing process,
► Using horizontal air supply, scientific air duct design + new electronic expansion valve technology, the equipment saves up to 45% energy,
► Matched with charging and discharging equipment, water-cooled module. Meets the testing requirements for battery high-temperature storage, room temperature storage, low-temperature cold start, and high-temperature start,
► The shelves are made of stainless steel square tubes sprayed with Teflon + phenolic insulation plates,
Power Battery Test Items:
|
Discharge capacity test at different temperatures |
Hybrid pulse power characteristic test |
Actual operating condition simulation |
Low-temperature cold start/high-temperature start |
|
Discharge capacity test at different rates |
Dynamic discharge test |
SOC calibration |
High-temperature storage, room temperature storage |
|
AC and DC internal resistance test |
Energy efficiency test |
Peak power |
Standard cycle life |
|
Remaining capacity and capacity recovery capability |
No-load capacity loss |
Calendar life cycle |
Operating condition cycle life |
|
Room temperature rate charging capacity |
Insulation test |
Withstand voltage test |
Accelerated aging test |
|
Battery cell internal resistance test |
Air tightness test |
Appearance inspection |
Dynamic cycle life |
Common Test Standards:
|
Power Battery |
Standard Number |
Standard Name |
|
Battery Cell |
GB/T 31484-2015 |
Requirements and test methods for cycle life of power batteries for electric vehicles |
|
GB/T 31486-2015 |
Electrical performance requirements and test methods for power batteries for electric vehicles |
|
|
GB/T 36276 |
Lithium-ion batteries for energy storage |
|
|
GB 38031 |
Safety requirements for power batteries for electric vehicles |
|
|
IEC 62660-1:2018 |
Lithium-ion secondary batteries for electric vehicles Part 1: Performance testing |
|
|
IEC 62619 |
Secondary batteries and battery packs containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries and battery packs for industrial applications |
|
|
Module |
GB/T 31484-2015 |
Requirements and test methods for cycle life of power batteries for electric vehicles |
|
GB/T 31486-2015 |
Electrical performance requirements and test methods for power batteries for electric vehicles |
|
|
GB/T 36276 |
Lithium-ion batteries for energy storage |
|
|
YD/T 2344.2-2015 |
Communication lithium iron phosphate battery packs Part 2: Standalone battery packs |
|
|
Battery Pack |
GB 38031-2020 |
Safety requirements for power batteries for electric vehicles |
|
GB/T 31467-2023 |
Test methods for electrical performance of lithium-ion power battery packs and systems for electric vehicles |
|
|
ISO 12405-4: 2018 |
Lithium-ion secondary batteries for electric vehicles Part 1: Performance testing |
|
|
ISO 6469-1: 2019 |
Safety regulations for electric road vehicles Part 1: Rechargeable energy storage systems (RESS) |
|
|
ECE R100.03 |
Automotive power battery UN ECE R100 regulation 03 series |
|
|
UL2580: 2021 |
Safety standard for electric vehicle batteries |
Technical Specifications
|
Battery Cell (Explosion-proof) High and Low Temperature and Humidity Test Chamber |
||
|
Model |
KS-DJFB-1125L-A/B/D |
|
|
Working Volume (L) |
1125 L |
|
|
Internal Dimensions |
Width W |
1500 |
|
Depth D |
500 |
|
|
Height H |
1500 |
|
|
Window Size |
Width W * Height H |
360*510 |
|
Performance Indicators |
Temperature Range |
A: -40~+180℃, B: -20~+180℃, D: -70~+180℃ |
|
Temperature fluctuation |
≤±0.5℃ (≤±0.5℃, according to GB/T5170-1996) |
|
|
Temperature uniformity |
≤2.0℃ |
|
|
Temperature deviation |
≤±2.0℃ |
|
|
Heating rate |
≥3℃/min (full range non-linear, total weight of battery load: 80kg aluminum ingot, heat dissipation: 60W) |
|
|
Cooling rate |
≥2℃/min (full range non-linear, total weight of battery load: 80kg aluminum ingot, heat dissipation: 60W) |
|
|
Humidity range |
20%RH～98%RH (other special conditions require customization) |
|
|
Humidity uniformity |
≤3.0%R.H |
|
|
Humidity deviation |
≤±3%RH (humidity >75%RH), ≤±5%RH (humidity ≤75%RH) |
|
|
Humidity fluctuation |
≤±2.0%R.H |
|
|
Temperature and humidity time resolution |
Temperature: 0.01℃; Humidity: 0.1%; Time: 1S |
|
|
Cabinet material |
Inner box |
SUS304 high-grade stainless steel plate, thickness 1.2mm |
|
Outer box |
Cold-rolled steel plate + double-sided electrostatic spraying process, thickness 1.5mm |
|
|
Insulation |
Rigid polyurethane foam insulation layer, thickness 100mm |
|
|
Noise |
＜70dB |
|
|
Controller |
True color LCD touch-type PLC architecture controller, multiple sets of intelligent PID control |
|
|
Cooling method |
Water cooling |
|
|
Power supply |
AC380V±10% 50Hz,3P5W |
|
|
Safety protection function |
Safety protection |
Pressure relief, explosion-proof chain (standard), strong exhaust (optional) |
|
Monitoring function |
Smoke sensor, gas detection (CH, CO, H2), over-temperature protection, three-color alarm light, buzzer |
|
|
Fire extinguishing function |
Perfluorohexanone, water spray, water immersion, carbon dioxide fire extinguisher |
|
|
Safety PLC |
Manual/automatic fire extinguishing, remote fire extinguishing, independent alarm power off |
|
|
Power (KW) |
10.5 |
|
|
Model description |
|
|
Research, design and production of environmental testing machines
Contact Us
Address: No. 1, Building 1, Zhenrong Road, Wusha, Chang'an Town, Dongguan City, Guangdong Province
Scan the code to add friend
Dongguan Kexun Precision Instrument Co., Ltd. Copyright © 2020
SAF Coolest v1.3.1.2 设置面板 GAGSE-ZGYF-JXADE-AFZ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHomepage
V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用
CONTACT US：
Email：
TEL：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Dongguan Kexun Precision Instrument Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地